CLP-170 CLP-150 - Yamaha

Selecting the reverb type
[ReverbType]
TIP
You cannot set this parameter for the voice parts “Left”
and “LeftXLayer.”
See the procedure on page 71.
Setting range:
Room Simulates reverberation in a room.
Hall1 Simulates reverberation in a concert hall.
Hall2 Reverberation is slightly longer than that of
“Hall1.”
Stage Reverberation suitable for a solo instrument
sound.
Plate Reverberation from the vibration of a
metal plate.
TIP
The reverb effect is not applied if the ReverbSend
parameter is set to “0.”
See the procedure on page 71.
In Dual mode:
Setting range:
0 - 127
A
C
Setting the reverb depth
[ReverbSend]*
A
C
A
C
B
NO YES
D
B
NO YES
D
B
NO YES
Voice for editing (Voice 1 or Voice 2)
D
Detailed settings for the voices [VOICE SETTING]
Selecting the chorus type
[Chorus Type]
TIP
You cannot set this parameter for the voice parts “Left”
and “Left × Layer.”
See the procedure on page 71.
Setting range:
Chorus Adds a rich, spacious sound.
Celeste Adds swell and a spacious sound.
Flanger Adds swell effects of an ascending or
descending jet plane.
Setting the chorus depth
[ChorusSend]*
See the procedure on page 71.
In Dual mode:
Setting range:
0 - 127
A
C
A
C
A
C
B
NO YES
D
B
NO YES
D
B
NO YES
Voice for editing (Voice 1 or Voice 2)
D
CLP-170/150 79