CLP-170 CLP-150 - Yamaha

Message List
(CLP-170)
(CLP-170)
(CLP-170)
98 CLP-170/150
Message Meaning
In the CopyDisk operation (page 52), the copy source disk has not
been inserted to the disk drive. Insert the disk.
In the CopyDisk operation (page 52), the copy destination disk has
not been inserted into the disk drive. Insert the disk.
You turned off the power to the Clavinova while it was writing a
song to storage memory. This message appears next time you turn
on the power. The Clavinova checks if the contents of storage memory
can be recovered.
This message appears following the message “LastPowerOffIllegalMemorySongChecking,”
indicating that the Clavinova recovered
data in the storage memory as much as possible.
This message appears following the message “LastPowerOffIllegalMemorySongChecking,”
indicating that the Clavinova could not
recover data in the storage memory and that all memory songs were
deleted.
While a preset song was being read, the Clavinova detected defects in
memory. Reset the Clavinova to its normal (factory default) settings
with “MemorySongIncluded” (page 95) after you back up all song
data.
This message indicates that there may be a problem with the memory.
If the message appears repeatedly when you continue using the
Clavinova, back up the song data, then restore the default setting by
using “FactorySet” with “MemorySongIncluded” selected (page 95).
There is not enough memory space left and you cannot save any
more songs. Save songs to a floppy disk (page 52) or delete some
songs in the storage memory, then save new data to memory.
A floppy disk has not been inserted into the disk drive for a diskrelated
operation. Insert the disk and continue.
This message will appear if there is no song for the “SaveToMemory”
(page 48) or “SaveToDisk” (CLP-170) (page 49) operation to save. In
this case, no song will be saved.
You tried to delete a song that does not exist in the storage memory
or on disk. You cannot delete the song.