CLP-170 CLP-150 - Yamaha

Recording Your Performance
Adjusting the volume balance between playback and your performance [SONG
BALANCE]
While recording multiple parts into tracks one by one, you can adjust the volume balance between the playback
of the recorded parts and your current performance.
Procedure
1. Move [SONG BALANCE] to the left or right to make
adjustments.
The song playback volume
will be lower.
Recording in Dual or Split mode
TIP
Some commercially-available
music data contains
extremely high volumes.
When using such data,
please adjust the song balance.
TIP
The song balance setting is
also used during playback.
(See page 55.)
When you record in Dual or Split mode, the Clavinova records each voice onto a separate track. The following
table shows how tracks are assigned to each voice.
CAUTION
When you record multiple parts into tracks one by one, or when you record new data over an existing song (see
page 43), the existing data will be erased. Proceed with caution.
In the following example, Tracks 1, 2, and EXTRA TRACKn have been selected for recording.
Tracks assigned for
recording
Tracks
used for
recording
MAIN
(voice 1)
LEFT
(voice 1)
MAIN
(voice 2)
LEFT
(voice 2)
SONG KEYBOARD
SONG BALANCE
TRACK1 TRACK2
Note: TRACKn = TRACK 3 – TRACK 16
If “n+1,” “n+2,” and “n+3” exceed 16, TRACKs 1, 2, and 3 are used.
TIP
Switching between Dual and Split mode in a song is not recorded.
Your playing volume
will be lower.
Dual Split Split+Dual
EXTRA
TRACKn
TRACK1 TRACK2
EXTRA
TRACKn
TRACK1 TRACK2
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
EXTRA
TRACKn
TRACK1 TRACK2 TRACKn TRACK1 TRACKn TRACK1 TRACKn
– TRACK2 TRACKn+1 TRACK2 TRACKn +1
TRACK3 TRACK4
TRACKn
+2
– TRACK3 TRACKn +2
– – TRACK4 TRACKn +3
CLP-170/150 45