CLP-170 CLP-150 - Yamaha

Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsichords
and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
A
C
A
C
Setting range:
0 (softest) - 64 (largest changes in the level) - 127
(loudest and fixed)
B
NO YES
D
B
NO YES
Voice for editing (Voice 1 or Voice 2)
D
Detailed settings for the voices [VOICE SETTING]
Setting the right pedal function
[RPedal]
See the procedure on page 71.
A
C
Setting range:
Sustain ON/OFF switch type damper
SustainCont Damper that sustains the sound
proportionately to how deeply
you press the pedal
Sostenuto Sostenuto (page 29)
Soft Soft (page 29)
Expression A function that lets you create
changes in dynamics (volume) as
you play
PitchBend Up A function that smoothly raises
the pitch
PitchBend Down A function that smoothly lowers
the pitch
RotarySpeed Change the rotational speed of
the JazzOrgan rotary speaker
(switch between fast/slow each
time you press the pedal)
Viberotor Switch the vibraphone vibrato
on/off (switch on/off each time
you press the pedal)
Off No function
Normal setting:
SustainCont
Setting the center pedal function
[MPedal]
See the procedure on page 71.
A
C
Setting range:
Same as “Specifying the function of the right
pedal,” above.
Normal Setting:
Sostenuto
B
NO YES
D
B
NO YES
D
CLP-170/150 83