CLP-170 CLP-150 - Yamaha

More documents

Recommendations

Info

Detailed settings for the voices [VOICE SETTING] 80 CLP-170/150 Setting the chorus on/off [ChorusOnOff] You can set the [CHORUS] button on or off for each voice. When you select a voice, the chorus on/ off setting for the voice automatically changes according to this parameter. TIP Even if this parameter is turned on, the chorus effect is disabled if the ChorusSend parameter is set to 0. See the procedure on page 71. Setting range: On/Off A C Selecting the DSP type* [DSP Type (DSP)] You can select other effects (than reverb and chorus). See the procedure on page 71. A C Setting range: DelayLCR Delay applied at left, center, and right positions. DelayLR Delay applied at left and right positions. Echo Echo-like delay CrossDelay Left and right delays are crossed. Symphonic Adds a rich and deep acoustic effect. RotarySpeaker Adds the vibrato effect of a rotary speaker. Tremolo The volume level changes in rapid cycles. VibeRotor The vibrato effect of a vibraphone. B NO YES D B NO YES D AutoPan The sound pans left to right and back and forth. Phaser The phase changes periodically, swelling the sound. AutoWah The center frequency of the wah filter changes periodically. SoundBoardRev Simulates the reverberation of a piano soundboard. Off No effect. Setting the speed of the vibraphone vibrato effect* [VibeRotorSpeed] TERMINOLOGY Rotor= The rotating portion of an electrical device etc. This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. This sets the speed of the vibrato effect that is applied when you have selected Vibraphone and are using the VibeRotor pedal. See the procedure on page 71. Setting range: 1–10
Turning the vibraphone vibrato effect on/off* [VibeRotorOnOff (RotorOnOff)] This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. It turns on/off the vibrato effect that is applied when you use the VibeRotor pedal. See the procedure on page 71. A C Setting range: On/Off Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)] This will be displayed only if RotarySpeaker is selected for the DSP Type parameter explained above. It sets the rotation speed of the rotary speaker effect. See the procedure on page 71. Setting range: Slow/Fast Adjusting the depth of the DSP effect* [DSPDepth] This sets the depth of the DSP effect (page 80). Some DSP Type settings do not allow you to set the DSPDepth. See the procedure on page 71. Setting range: 1 (output only the original sound with almost no effect applied)–127 (output only the sound processed by the effect) B NO YES D Detailed settings for the voices [VOICE SETTING] Adjusting the brightness of the sound* [Brightness] See the procedure on page 71. Setting range: –64–+63 Adjusting the resonance effect* [HarmonicContent (Harmonic)] See the procedure on page 71. Setting range: –64–+63 TIP Resonance can produce a distinctive “peaky” tone, making the sound brighter and harder. CLP-170/150 81
Page 1 and 2:
CLP-170/CLP-150 CLP-170 CLP-150 Own
Page 3 and 4:
WARNING PRECAUTIONS PLEASE READ CAR
Page 7 and 8:
Table of contents Changing a voice
Page 9 and 10:
Table of contents Pitch bend range
Page 11 and 12:
Settings Application Index Making d
Page 13 and 14:
• To protect your data (Write-pro
Page 15:
The Clavinova includes 50 preset so
Page 19 and 20:
Basic Operation CLP-170/150 19
Page 22 and 23:
Listening to the Demonstration Tune
Page 24 and 25:
Listening to 50 Piano Preset Songs
Page 26 and 27:
Listening to 50 Piano Preset Songs
Page 28 and 29:
Selecting and Playing Voices 28 CLP
Page 30 and 31: Selecting and Playing Voices 30 CLP
Page 33 and 34: Combining two voices (Dual mode) Se
Page 35 and 36: Selecting and Playing Voices Splitt
Page 37 and 38: Using the metronome Selecting and P
Page 39 and 40: 2. Select a voice. Select a voice (
Page 42 and 43: Recording Your Performance 42 CLP-1
Page 45 and 46: Recording Your Performance Adjustin
Page 47 and 48: Basic file operation Saving Recorde
Page 49 and 50: Saving Recorded Songs and Handling
Page 51 and 52: Renaming a song...[RenameSong] Savi
Page 53 and 54: Saving Recorded Songs and Handling
Page 55 and 56: Playing Back Recorded Songs and Com
Page 57: 5. Return to the main screen. Press
Page 60: Connections 60 CLP-170/150 6 AUX IN
Page 65 and 66: Connections 3. Connecting the USB p
Page 67 and 68: Detailed Settings CLP-170/150 67
Page 69 and 70: Voices [VOICE SETTING] In Dual mode
Page 71 and 72: Making detailed settings MIN MAX NE
Page 73 and 74: Detailed settings for recording and
Page 75 and 76: TIP Use the following buttons to sp
Page 77 and 78: Detailed settings for the voices [V
Page 79: Selecting the reverb type [ReverbTy
Page 83 and 84: Setting the touch sensitivity [Touc
Page 85 and 86: Detailed settings for iAFC [iAFC SE
Page 87 and 88: MIDI [MIDI SETTING] You can make de
Page 89 and 90: Setting Local control on/off [Local
Page 91 and 92: Other settings You can make detaile
Page 93 and 94: Setting range: -12 (-1 octave)-0 (n
Page 95 and 96: Switch the speaker on/off [Speaker]
Page 97 and 98: (CLP-170) Message Meaning Message L
Page 103 and 104: ■ I cannot change the key signatu
Page 105 and 106: Appendix CLP-170/150 105
Page 107: Data Compatibility This section cov
Page 110 and 111: Preset Voice List Voice group Voice
Page 112 and 113: CLP-150: Keyboard Stand Assembly CA
Page 114 and 115: CLP-150: Keyboard Stand Assembly 7.
Page 116 and 117: CLP-170: Keyboard Stand Assembly 2.
Page 119 and 120: N New Song 38 Normal setting* 30 O
Page 121 and 122: IMPORTANT SAFETY INSTRUCTIONS INFOR
Page 123 and 124: For details of products, please con
show all

CLP-170 CLP-150 - Yamaha

Create successful ePaper yourself

Delete template?

Save as template?