CLP-170 CLP-150 - Yamaha

More documents

Recommendations

Info

Message List 96 CLP-170/150 The messages are listed in alphabetical order. (CLP-170) (CLP-170) (CLP-170) (CLP-170) (CLP-170) (CLP-170) Message Meaning This will be displayed following the “BulkDataReceiving Voice” message. This indicates that the Clavinova finished receiving the bulk data. Once you have verified this message, you may proceed to the next step. Receiving bulk data has failed. Check the parameter settings and try again. The Clavinova is receiving the voice setting bulk data while this message is displayed. Wait until the message disappears, then proceed to the next step. This message will appear if a sound is audible in the vicinity of the Clavinova during automatic adjustment. The automatic adjustment may abort, and the settings reset to their default values. In this case, perform the automatic adjustment once again. This message means that when the “Speaker” setting is set to Normal and headphones are connected, no sound is output from the rear speaker, and therefore automatic adjustment of iAFC is not possible. In this case, unplug the headphones. This message means that automatic adjustment of iAFC is not possible because no sound is output from the rear speaker. In this case if the “Speaker” setting is Off, turn “Speaker” On. If “Speaker” is set to Normal and headphones are connected, unplug the headphones. This message confirms that in the “VoiceBulkDump” operation (page 90), you pressed B [–(NO)] to cancel while data was being transmitted. This message is displayed following the message “Executing.” The Clavinova’s internal processing is complete. You may proceed to the next step. When you delete a folder, this message asks you whether you want to delete all of the files in that folder. To delete all files in the folder, press the D [+(YES)] button. To cancel, press the D [–(NO)] button. Writing or reading data from the disk has failed. Try again. If you still see this message, the disk may be damaged or the disk drive may have malfunction. If you see this message while using a brand new disk, it is more likely that the disk drive is malfunctioning. Ask your Yamaha dealer for repair. The floppy disk space is full and can no longer record data. Use a new disk (page 48) or delete unnecessary files from the disk (page 49) to make room for new data.
(CLP-170) Message Meaning Message List You attempted to eject a floppy disk from the disk drive while the drive was writing or reading. The writing or reading operation is not complete yet. Try it again. When you attempted to rename a song and save it in “RenameSong” (page 51), this message will appear if an identically-named song already exists in the save memory / floppy disk that contains that song. Three seconds after this message is displayed, you will return to the previous screen. Please specify a different name. This message prompts you to execute a file-related operation. Press the B [+ (YES)] button to proceed, or press the [EXIT] button to cancel. The Clavinova is processing the data internally. Wait until the message disappears, then proceed to the next step. The normal (factory default) settings (except for the memory song setting) (“FactorySet” on page 95) have been restored. This message also appears if you press and hold down the C7 key and turn on the power to the Clavinova (page 95). The normal (factory default) settings (including the memory song setting) (“FactorySet” on page 95) have been restored. This message also appears if you press and hold down the C7 and B ♭ 6 keys and turn on the power to the Clavinova (page 95). The Clavinova’s flash memory (storage memory) has expired. Consult your Yamaha dealer. If this message appears, the Clavinova will not back up the songs and settings in memory. Press the [EXIT] button to return to the previous screen. There is a problem with the TO HOST/USB connector When using the CLP-170/150 connected to your personal computer ... The driver or MIDI application on your computer is not functioning correctly, perhaps because the computer is turned off, the cable is not connected correctly, or the HOST SELECT switch is not set correctly. In this case, turn off the power of the CLP-170/150 and your computer, and check the cable connections and HOST SELECT switch setting. Then turn on the power in the order of your computer → CLP-170/150, and check that the driver and MIDI application on your computer are functioning correctly. When using the CLP-170/150 by itself ... This message may appear if a cable is left connected to the [TO HOST] or [USB] connector of the CLP-170/150. In this case, turn off the power of the CLP-170/150, disconnect the cable, and then turn on the power again. If the cable is left connected, the CLP-170/150 may not function correctly. CLP-170/150 97
Page 1 and 2:
CLP-170/CLP-150 CLP-170 CLP-150 Own
Page 3 and 4:
WARNING PRECAUTIONS PLEASE READ CAR
Page 7 and 8:
Table of contents Changing a voice
Page 9 and 10:
Table of contents Pitch bend range
Page 11 and 12:
Settings Application Index Making d
Page 13 and 14:
• To protect your data (Write-pro
Page 15:
The Clavinova includes 50 preset so
Page 19 and 20:
Basic Operation CLP-170/150 19
Page 22 and 23:
Listening to the Demonstration Tune
Page 24 and 25:
Listening to 50 Piano Preset Songs
Page 26 and 27:
Listening to 50 Piano Preset Songs
Page 28 and 29:
Selecting and Playing Voices 28 CLP
Page 30 and 31:
Selecting and Playing Voices 30 CLP
Page 33 and 34:
Combining two voices (Dual mode) Se
Page 35 and 36:
Selecting and Playing Voices Splitt
Page 37 and 38:
Using the metronome Selecting and P
Page 39 and 40:
2. Select a voice. Select a voice (
Page 42 and 43:
Recording Your Performance 42 CLP-1
Page 45 and 46: Recording Your Performance Adjustin
Page 47 and 48: Basic file operation Saving Recorde
Page 49 and 50: Saving Recorded Songs and Handling
Page 51 and 52: Renaming a song...[RenameSong] Savi
Page 53 and 54: Saving Recorded Songs and Handling
Page 55 and 56: Playing Back Recorded Songs and Com
Page 57: 5. Return to the main screen. Press
Page 60: Connections 60 CLP-170/150 6 AUX IN
Page 65 and 66: Connections 3. Connecting the USB p
Page 67 and 68: Detailed Settings CLP-170/150 67
Page 69 and 70: Voices [VOICE SETTING] In Dual mode
Page 71 and 72: Making detailed settings MIN MAX NE
Page 73 and 74: Detailed settings for recording and
Page 75 and 76: TIP Use the following buttons to sp
Page 77 and 78: Detailed settings for the voices [V
Page 79 and 80: Selecting the reverb type [ReverbTy
Page 81 and 82: Turning the vibraphone vibrato effe
Page 83 and 84: Setting the touch sensitivity [Touc
Page 85 and 86: Detailed settings for iAFC [iAFC SE
Page 87 and 88: MIDI [MIDI SETTING] You can make de
Page 89 and 90: Setting Local control on/off [Local
Page 91 and 92: Other settings You can make detaile
Page 93 and 94: Setting range: -12 (-1 octave)-0 (n
Page 95: Switch the speaker on/off [Speaker]
Page 99 and 100: (CLP-170) Message Meaning Message L
Page 101 and 102: (CLP-170) Message Meaning Message L
Page 103 and 104: ■ I cannot change the key signatu
Page 105 and 106: Appendix CLP-170/150 105
Page 107: Data Compatibility This section cov
Page 110 and 111: Preset Voice List Voice group Voice
Page 112 and 113: CLP-150: Keyboard Stand Assembly CA
Page 114 and 115: CLP-150: Keyboard Stand Assembly 7.
Page 116 and 117: CLP-170: Keyboard Stand Assembly 2.
Page 119 and 120: N New Song 38 Normal setting* 30 O
Page 121 and 122: IMPORTANT SAFETY INSTRUCTIONS INFOR
Page 123 and 124: For details of products, please con
show all

CLP-170 CLP-150 - Yamaha

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?