CLP-170 CLP-150 - Yamaha

Connections
60 CLP-170/150
6 AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the Clavinova’s
speakers. Refer to the diagram below and use audio cables for connection.
CAUTION
When the Clavinova’s AUX IN jacks are connected to an external device, first
turn on the power to the external divice, then to the Clavinova. Reverse this order
when you turn the power off.
phone plug
(standard)
7 AUX OUT [R][L] Pin jacks (LEVEL FIXED), [R][L/L+R] Phone jacks
These jacks let you connect the Clavinova to your stereo system etc. to play at
higher volumes, or connect a cassette recorder etc. to record your playing.
Use audio cables to make connections as shown in the diagram.
CAUTION
When the Clavinova’s AUX OUT jacks are connected to an external audio system,
first turn on the power to the Clavinova, then to the external audio system.
Reverse this order when you turn the power off.
Clavinova
Clavinova
R L/L+R
AUX IN
phone plug
(standard)
AUX IN
audio cable
LEVEL FIXED
L/L+R R L R
AUX OUT
To powered speakers
When these are connected (with standard
phone plugs), you can use the
[MASTER VOLUME] control to adjust
the volume of the sound output to the
external device.
RCA
pin plug
Tone Generator
audio cable
Plug shape depends
on the divece.
AUX OUT
Stereo
AUX IN
RCA
pin plug
When these are connected (with RCA pin
plug; LEVEL FIXED), the sound is output to
the external device at a fixed level, regardless
of the [MASTER VOLUME] control setting.
TIP
The Clavinova’s [MASTER
VOLUME] dial setting affects
the input signal from the AUX
IN jacks, but the [REVERB],
[CHORUS], and BRIL-
LIANCE [MELLOW]
[BRIGHT] (page 30) settings
do not.
TIP
If you connect the Clavinova
to a monaural device,
use only the AUX IN [L/L+R]
jack or AUX OUT [L/L+R]
jack.
CAUTION
Do not route the output from
the AUX OUT jacks to the
AUX IN jacks. That is, when
you connect an external
audio device to the AUX
OUT jacks, do not connect
the audio device to the
Clavinova’s AUX IN jacks. If
you make this connection,
the signal input at the AUX
IN jacks will be output from
AUX OUT. This creates an
audio loop, causing audio
oscillation and abnormal
playback, and leading to
malfunction of both pieces
of equipment.
TIP
Use audio cables and adaptor
plugs with no resistance.
TIP
The Clavinova’s [MASTER
VOLUME] setting will not
affect the sound that is output
from AUX OUT (LEVEL
FIXED).