CLP-170 CLP-150 - Yamaha

MIDI [MIDI SETTING]
You can make detailed MIDI settings, such as setting up MIDI transmit/receive channels.
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/reception. It
enables the transfer of performance data and commands between MIDI devices and personal computers.
Using MIDI, you can control a connected MIDI device from the Clavinova, or control the Clavinova from
a connected MIDI device or computer.
MIDI connectors
MIDI [IN]: Receives MIDI data.
MIDI [OUT]: Transmits MIDI data.
MIDI [THRU]: Transmits data received at the MIDI [IN] connector as it is.
TIP
Prepare dedicated MIDI cables.
[TO HOST] connector
Use this connector to connect the Clavinova to a computer.
TIP
The type connecting cable varies depending on the computer. Refer to “Connecting
a Personal Computer” on page 61 for more information.
[USB] connector
Use this connector to connect the Clavinova and computer.
TIP
MIDI performance data and
commands are transferred in
the form of numeric values.
Since MIDI data that can be
transmitted or received varies
depending on the type of
MIDI device, check the “MIDI
Implementation Chart” to find
out what MIDI data and commands
your devices can
transmit or receive. The Clavinova’s
MIDI Implementation
Chart is listed on pages 31
and 32 in the “Reference
Booklet” for the CLP-170/150.
When you are using the
MIDI connectors, set the
[HOST SELECT] switch to
“MIDI.” (See page 59.)
TIP
When you are using the [TO
HOST] connector, set the
[HOST SELECT] switch correctly,
according to the type
of computer you are using.
(See page 59.)
NOTE
When you are using the
[USB] connector, set the
[HOST SELECT] switch to
“USB.”
TIP
You can also obtain detailed
information about MIDI from
various music magazines
and books.
CLP-170/150 87