CLP-170 CLP-150 - Yamaha

More documents

Recommendations

Info

Questions about Operations and Functions 102 CLP-170/150 ■ The buttons do not respond. While you are using a function, some buttons not used for the function are disabled. If the song is playing, stop the playback. Otherwise, press the [EXIT] button to return to the main screen. Then, perform the desired operation. ■ The sound sustains and does not decay when I press the sostenuto pedal. With the voices in the CHURCH ORGAN, JAZZ ORGAN, STRINGS, CHOIR group, or some voices in the XG group, the sound continues sustaining while you are holding down the sostenuto pedal. ■ Higher or lower notes does not sound correctly when the transpose or octave setting is made. The setting range for the transposition and octave setting is C-2 - G8. (With the normal setting, the Clavinova’s 88 keys covers the range of A-1 - C7.) If the lowest key is set to a note lower than C-2, it will produce a sound one octave higher. If the highest key is set to a note higher than G8, it will produce a sound one octave lower. ■ How can I return to the recording or song select screen during song recording or playback? Press one of the SONG SELECT [ ] and [ ] buttons once. ■ The tempo does not change even though I recorded with tempo changes. Depending on the timing of tempo changes, the changed tempo may not be recorded. In this case, the recording will be played back at the original tempo. Make tempo changes when the recording track is selected and a red track indicator is flashing. The same trick applies to editing the tempo after recording. ■ Performance in Dual or Split mode is not recorded. Track data is lost unexpectedly. For Dual or Split mode recording, the recording track for the second voice (that is, the voice for the left-hand part) is automatically assigned (page 33). Therefore, if the track already has data, the data will be overwritten during recording. Also, switching to Dual mode or Split mode in the middle of the song is not recorded. Therefore, the notes you played with the second voice (or the notes lower than the Split point) are not recorded. ■ What type of data is recorded? Data recorded in the tracks: • Note data (notes you play) • Voice selection • Clavinova pedals and external pedal on/off • Reverb depth [ReverbSend] • Chorus depth [ChorusSend] • DSP effect depth [DSPDepth] • Sound brightness [Brightness] • Resonance effect setting [Harmonic Content] • Equalizer’s low-range frequency setting [EQLowFreq.] • Equalizer’s low-range gain setting [EQLowGain] • Equalizer’s high-range frequency setting [EQHighFreq.] • Equalizer’s high-range gain setting [EQHigh- Gain] • Octave setting of the voice [Octave] • Volume setting of each voice [Volume] • Left/right position of each sound [Pan] • Fine pitch adjustment between two voices (Dual only) [Detune] • Volume change in response to playing strength for each voice [TouchSense] Data recorded globally in all tracks: • Tempo • Time signature • Reverb type • Chorus type • DSP effect type You can change all data except for note data after recording. You can change the time signature at the beginning of the song, or at a position in the song to which you move, by using the B [–]/[+] buttons while the song is stopped.
■ I cannot change the key signature in the song after recording. Press the [TOP] button to locate the top of the song, use the B [–]/[+] buttons to locate the measure in which you wish to change the key signature, then change it. ■ How much data can I record? • Current memory (page 48): About 800KB • Storage memory (page 48): About 750KB • 2DD floppy disk (CLP-170) (page 12): about 720KB • 2HD floppy disk (CLP-170) (page 12): about 1.4MB ■ The on/off setting of the pedal connected to the AUX PEDAL jack is reversed. Some types of pedals may turn on and off in opposite fashion. Use the “AuxPedalType” parameter (page 84) in the “OTHER SET- TING” menu to change the external pedal setting. Questions about Operations and Functions ■ The song title is not correct. The “CharacterCode” setting may be different than that used when you named the song. Also, if the song was recorded on another instrument, the title might be displayed incorrectly. Use the “CharacterCode” parameter (page 54) in the FILE menu to change the setting. However, if the song was recorded on another instrument, changing the “CharacterCode” parameter setting may not resolve the problem. ■ What is the difference between “Touch- Sense” and “TouchResponse” MIDI data? “TouchSense” determines the manner and degree to which the volume level changes in response to your touch on the keyboard. The MIDI note-on velocity data is not changed. It changes the volume level at the same velocity data. “TouchResponse” determines the touch sensitivity of an instrument. The MIDI note-on velocity data is changed when you play the keyboard with a consistent touch. CLP-170/150 103
Page 1 and 2:
CLP-170/CLP-150 CLP-170 CLP-150 Own
Page 3 and 4:
WARNING PRECAUTIONS PLEASE READ CAR
Page 7 and 8:
Table of contents Changing a voice
Page 9 and 10:
Table of contents Pitch bend range
Page 11 and 12:
Settings Application Index Making d
Page 13 and 14:
• To protect your data (Write-pro
Page 15:
The Clavinova includes 50 preset so
Page 19 and 20:
Basic Operation CLP-170/150 19
Page 22 and 23:
Listening to the Demonstration Tune
Page 24 and 25:
Listening to 50 Piano Preset Songs
Page 26 and 27:
Listening to 50 Piano Preset Songs
Page 28 and 29:
Selecting and Playing Voices 28 CLP
Page 30 and 31:
Selecting and Playing Voices 30 CLP
Page 33 and 34:
Combining two voices (Dual mode) Se
Page 35 and 36:
Selecting and Playing Voices Splitt
Page 37 and 38:
Using the metronome Selecting and P
Page 39 and 40:
2. Select a voice. Select a voice (
Page 42 and 43:
Recording Your Performance 42 CLP-1
Page 45 and 46:
Recording Your Performance Adjustin
Page 47 and 48:
Basic file operation Saving Recorde
Page 49 and 50:
Saving Recorded Songs and Handling
Page 51 and 52: Renaming a song...[RenameSong] Savi
Page 53 and 54: Saving Recorded Songs and Handling
Page 55 and 56: Playing Back Recorded Songs and Com
Page 57: 5. Return to the main screen. Press
Page 60: Connections 60 CLP-170/150 6 AUX IN
Page 65 and 66: Connections 3. Connecting the USB p
Page 67 and 68: Detailed Settings CLP-170/150 67
Page 69 and 70: Voices [VOICE SETTING] In Dual mode
Page 71 and 72: Making detailed settings MIN MAX NE
Page 73 and 74: Detailed settings for recording and
Page 75 and 76: TIP Use the following buttons to sp
Page 77 and 78: Detailed settings for the voices [V
Page 79 and 80: Selecting the reverb type [ReverbTy
Page 81 and 82: Turning the vibraphone vibrato effe
Page 83 and 84: Setting the touch sensitivity [Touc
Page 85 and 86: Detailed settings for iAFC [iAFC SE
Page 87 and 88: MIDI [MIDI SETTING] You can make de
Page 89 and 90: Setting Local control on/off [Local
Page 91 and 92: Other settings You can make detaile
Page 93 and 94: Setting range: -12 (-1 octave)-0 (n
Page 95 and 96: Switch the speaker on/off [Speaker]
Page 97 and 98: (CLP-170) Message Meaning Message L
Page 99 and 100: (CLP-170) Message Meaning Message L
Page 101: (CLP-170) Message Meaning Message L
Page 105 and 106: Appendix CLP-170/150 105
Page 107: Data Compatibility This section cov
Page 110 and 111: Preset Voice List Voice group Voice
Page 112 and 113: CLP-150: Keyboard Stand Assembly CA
Page 114 and 115: CLP-150: Keyboard Stand Assembly 7.
Page 116 and 117: CLP-170: Keyboard Stand Assembly 2.
Page 119 and 120: N New Song 38 Normal setting* 30 O
Page 121 and 122: IMPORTANT SAFETY INSTRUCTIONS INFOR
Page 123 and 124: For details of products, please con
show all

CLP-170 CLP-150 - Yamaha

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?