NVIDIA QUADRO G-SYNC II

More documents

Recommendations

Info

NVIDIA Quadro G-Sync II User Guide Set Up the Software This section provides intructions for using the NVIDIA Control Panel to set up the genlock system. � Basic Genlock Setup � Detecting the House Sync Signal � Using the House Sync Signal � Restoring an Unstable Display Basic Genlock Setup 12 1. Right-click the desktop and then from the popup menu click NVIDIA Control Panel. 2. From the NVIDIA Control Panel Select a Task pane, under the Workstation heading, click Synchronize displays to open that page.
3. Under The timing server is, click the On this system radio button. 4. Click Apply. The graphics board should automatically detect the sync signal and no further action is needed. The following sections provide information on other tasks such as how to adjust the synchronization to the external house sync. You can also consult the online help by pressing F1 to open the Help fi le and then opening the Workstation->Frame Synchronization contents. Detecting the House Sync Signal NVIDIA Frame Synchronization Under Windows Normally, the software automatically detects the signal type that is being used. If necessary, you can force the software to detect the signal type as follows: 1. On the system that you have set up to be the server, rightclick the desktop and then from the pop-up menu click NVIDIA Control Panel. 2. From the NVIDIA Control Panel Select a Task pane, under the Workstation heading, click Synchronize displays to open that page, then click Edit Settings to open the Server Settings dialog box. 3. Click the Sync signal detection list arrow and then click the item corresponding to the house signal source. 4. Click OK to save the settings. 13
Page 1: NVIDIA QUADRO G-SYNC II DU-02796-00
Page 4 and 5: NVIDIA Quadro G-Sync II User Guide
Page 42 and 43: 4. To gain display privileges on a
Page 44 and 45: Setting Up Genlock + Frame Lock The
Page 46 and 47: Supported Frame Lock Confi guration
Page 48 and 49: Genlock Example Hardware Confi gura
Page 50 and 51: Frame Lock Example 1 Hardware Confi
Page 52 and 53: 9. Enable frame lock on slave devic
Page 54 and 55: 9. Enable frame lock on the slave d
Page 56 and 57: During operation, you can also quer
Page 58 and 59: 6. Set NV_CTRL_FRAMELOCK_SYNC_INTER
Page 60 and 61: Using the OpenGL Extensions This ch
Page 62 and 63: Buffer Swap Criteria The criteria f
Page 64 and 65: Confi guring Swap Barriers You can
Page 66 and 67:
wglQuerySwapGroupNV(), glxQuerySwap
Page 68 and 69:
Getting Driver Updates References a
Page 70 and 71:
Registration, Support and Warranty
Page 72 and 73:
Compliance and Certifi cations �
show all

NVIDIA QUADRO G-SYNC II

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?