NVIDIA QUADRO G-SYNC II

Setting Up Genlock + Frame Lock
The procedures in the previous two sections describe the more
common uses of the Quadro G-Sync II option card. A third
use involves a combination of genlock and frame lock.
In this setup, a set of client systems are connected to a system that
is designated as the server, as described in How To Set Up Frame
Lock. The difference is that the server system is genlocked to an
external house sync, as described in How To Set Up Genlock.
1. Follow the instructions under How To Set Up Frame
Lock and then attach an external sync source to one of
the systems included in the frame lock group.
2. Check the Server check box of the display that
In
Client
Out Out
Out In
NVIDIA Frame Synchronization Under Linux
Server Client Client
Sync Source
3.
is connected to that same system.
Check the Use House Sync if Present check box.
4. Enable synchronization by clicking Enable Frame Lock.
As with other frame lock/genlock controls, you must select
the signal server while synchronization is disabled.
In
40