NVIDIA QUADRO G-SYNC II
NVIDIA QUADRO G-SYNC II
NVIDIA QUADRO G-SYNC II
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>NVIDIA</strong> Quadro G-Sync <strong>II</strong> User Guide<br />
Using the House Sync Signal<br />
14<br />
This section describes how to:<br />
� Select which edge of the house sync signal to use as the trigger<br />
� Double the trigger frequency from the house sync signal<br />
� Properly handle interlaced house sync signals<br />
� Introduce a timing delay to the house sync signal<br />
1. From the <strong>NVIDIA</strong> Control Panel Select a Task pane,<br />
under Workstation, click Synchronize Displays.<br />
2. Make sure that the On this system radio button<br />
under The timing server is selected.<br />
3. Open the Server Settings dialog box using<br />
one of the following methods:<br />
� From the Synchronize Displays page, click Server Settings.<br />
4. Under The synchronization pulses are based on, click the An<br />
external house sync signal radio button.<br />
The Server Settings dialog<br />
box will show the incoming<br />
house sync frequency. A<br />
frequency of 0.00 Hz indicates<br />
that the system has not yet<br />
been set as the server.