Dolphin 9700 User's Guide Rev (a) - Finn-ID

Inserting and Removing Terminals1. To insert the terminal, hold the terminal with the bottom panel perpendicular to the base.2. Slide the terminal into the well until the Dock LED lights solid green.3. Charging begins immediately.Note: To remove a terminal, grasp it firmly in your hand and lift it up and out of the terminal well. The LEDs turn off.Charging TerminalsThe main battery of each terminal charges in 4 hours. The intelligent battery charging systemincorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals maybe seated in the base indefinitely without damage to the terminals, battery packs, or the base.1. Power the base; see Supplying Power on page 14-3.2. Insert a terminal into a terminal well; see Inserting and Removing Terminals on page 14-4.3. The Charge LED lights green to indicate that the terminal is powered and charging.14 - 4