Dolphin 9700 User's Guide Rev (a) - Finn-ID

PowerPower system settings contains two tabs: Battery and Advanced.Battery TabFor more information, see Batteries on page 3-13.Advanced TabDetermines power time-outs.For On battery power, select from the drop-down list,the number of minutes of inactivity you want to passbefore the terminal powers off when running on batterypower.For On external power, select from the drop-down list,the number of minutes of inactivity you want to passbefore the terminal powers off when running on externalpower.Note: You can also set automatic turn-off times for the terminal to conserve power. When the terminal is “turnedoff,” that means that it goes into suspend mode, see Suspend Mode on page 3-16.Regional SettingsRegional Settings enables you to customize the appearance and formatting to your geographic region.Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the$ or € € symbol), time, and date. These specifications apply to all screens, including the Today screen. TheRegion tab displays an overview of the region selected in the drop-down list at the top.The terminal is loaded with a number of pre-programmed regional settings. Select one from the list andthe results appear on the screen. To see specific settings or to change a specific setting, tap on one ofthe tabs, make the change, and tap OK to save it.Remove ProgramsRemove Programs enables you to remove programs installed on the terminal. Use this setting totroubleshoot when you receive messages that the terminal is out of memory. The programs removed areremoved from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (MyDevice > IPSM > Autoinstall) will re-install after the next hard reset.For information about the hard reset process, see Hard Reset (Cold Boot) on page 3-16.7 - 14