11.07.2015 Views

Dolphin 9700 User's Guide Rev (a) - Finn-ID

Dolphin 9700 User's Guide Rev (a) - Finn-ID

Dolphin 9700 User's Guide Rev (a) - Finn-ID

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MenuTap Menu on the Command Bar to adjust the camera settings, switch to video mode, and accessadditional camera options.ItemVideoModeOptionsDescriptionsActivate Video ModeNormal Mode, Burst Mode, Timer ModeResolution Set picture resolution (i.e., 320 x 240, 640 x 480, 800 x 600, 1600 x 1200)Zoom Set zoom (i.e., x1, x2, x3, and x4)FlashFocusBrightnessOptionsCamera Flash On or Camera Flash OffFocus On, Focus Off, Focus on Trigger, or Fixed-FocusSet the brightness setting from +2.0 EV to -2.0 EV in .5 EV incrementsSet General, Slide Show, Camera, and Video optionsTap Menu > Options. The Options menu contains four tabs:General Tab Slide Show Tab Camera Tab Video TabRecording Video1. Tap Start > Pictures & Videos > Camera > Menu > Video2. Point the terminal's camera lens at the object you want to capture.ENT3. Press the ENT key to start recording.4. Tap Stop or press ENT to stop recording.5 - 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!