Dolphin 9700 User's Guide Rev (a) - Finn-ID

Connections ManagerMicrosoft’s Connections Manager sets up multiple network connections to Internet Service Providers(ISPs) via external modem.Do NOT enter connection parameters in the Connections Manager if:• You are using one of the on-board wireless radios to connect to a network.The Dolphin terminal uses the settings from each radio’s configuration utility to connect.• You are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals.To Access the Connections ManagerTap Start > Settings > Connections > Connections icon .Task TabThe Task tab enables you to initially configure, and then manage network settings when using a modem.Select an item in this list and then complete the setup screens that follow with the appropriate informationfor your network.My ISPThe links under this heading enables you to add and manage modem connections to an ISP. To completethe setup screens, obtain the following information from your ISP:• ISP dial-up access telephone number• Username• Password• TCP/IP settingsMy Work NetworkThese links enable you to establish the following connections types:• Modem• Virtual Private Network (VPN)• *Proxy server connectionTo complete the setup screens, obtain the network parameters from your system administrator.8 - 4