Dolphin 9700 User's Guide Rev (a) - Finn-ID

The default values for these entries are as follows:MedState=25%This sets the Low Battery point to 25%. When the battery hits the percentage charge specifiedhere, the user is notified by this icon in the Navigation bar .LowState=10%This sets the Critical Battery point to 10%. When the battery hits the percentage chargespecified here, the user is notified by this icon in the Navigation bar .Note: Warnings do not appear when the terminal is on external power.Setting Critical and Low Battery PointsDevelopers can reset these parameters in the registry from 0 (no warning) to 99 (would nearly alwayswarn). You can review and set these battery points in the RegEdit Power Tool.1. Tap Start > Power Tools > RegEdit.2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power.3. Tap the Value Name to change the Value Data.You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn).4. Tap OK to save changes.For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guideavailable for download at www.honeywellaidc.com.Checking Battery PowerTap Start > Settings > System > Power.For more information, see Power on page 7-14.3 - 15