Dolphin 9700 User's Guide Rev (a) - Finn-ID

More documents

Recommendations

Info

Enabling the GSM RadioBy default, the GSM radio is not enabled after a hard reset. Verify the status of the radio in the DolphinWireless Manager.Tap Start > Settings > Connections > Dolphin Wireless Manager .If the Phone is set to OFF, tap the Phone rectangle and the GSM radio enables.Voice CommunicationYou can use the Dolphin terminal as a phone over the GSM radio.Audio ModesThe front panel of the 9700 contains both a speaker and a microphone that you can use to send andreceive audio signals over the GSM network, see Front Panel: 9700 on page 3-4.There are two audio modes:Handset Mode: The front speaker is used for receiving handset voice calls and the front panelmicrophone provides audio input to the terminal.Hands-Free Mode: Hands-free mode is when you use the rear speaker as a speakerphone. To switch tospeakerphone, tap on the speaker button in the Dialer window.9 - 4
Volume ControlUse the Dolphin keyboard to adjust the volume.Blue&VOLPGTo raise the volume, press the Blue modifier key + up arrow.To lower the volume, press the Blue modifier key + down arrow.OrPress the up or down arrow on the Volume Control button to adjust the volume ofthe active speaker, see Volume Control Button on page 3-8.Accessing the Dialer WindowWhen the GSM radio is active, tap Start > Phone .The Phone dialer opens.Displays the networkcarrier from the SIM card.Displays the mostrecent calls.DialingOnce the dialer window is open, you can dial out two ways:• Tap the buttons on the dialer window.• Use the physical keyboard (when the keyboard is in numeric mode).9 - 5
Page 1 and 2:
Dolphin ® 9700 Mobile Computerswit
Page 3 and 4:
Table of ContentsChapter 1 - Agency
Page 5 and 6:
System Menu........................
Page 7 and 8:
Communicating with the Dolphin Term
Page 9 and 10:
1Agency InformationDolphin 9700 mob
Page 11 and 12:
R&TTE Compliance Statement—802.11
Page 13 and 14:
2Getting StartedOut of the BoxVerif
Page 15 and 16:
Step 4. Set the Time and DateOn the
Page 17 and 18:
Icons in the Navigation BarIndicato
Page 19 and 20:
To move an icon to the top of the S
Page 21 and 22:
3Hardware OverviewStandard Configur
Page 23 and 24:
Accessories for the 9700Each of the
Page 25 and 26:
Front Panel Features for the 9700Bl
Page 27 and 28:
Back Panel Features for the 9700Bat
Page 29 and 30:
Installing a Memory Card1. Press th
Page 31 and 32:
Using the Touch PanelHoneywell defi
Page 33 and 34:
BatteriesThere are two types of bat
Page 35 and 36:
The default values for these entrie
Page 37 and 38: 4Using the Scan Image EngineOvervie
Page 39 and 40: DecodingThe terminal supports two t
Page 41 and 42: Capturing ImagesThe image-capture p
Page 43 and 44: 5Using the Color CameraOverviewAll
Page 45 and 46: MenuTap Menu on the Command Bar to
Page 47 and 48: 6Using the KeyboardsAvailable Keybo
Page 49 and 50: Using the Modifier KeysName Key Fun
Page 51 and 52: Key Normal Shift Blue Shift-Blue Bl
Page 53 and 54: Key Normal Shift Blue Blue-Lock Red
Page 55 and 56: 7System SettingsOverviewCustomized
Page 57 and 58: Personal MenuTo access the Personal
Page 59 and 60: Additional FunctionsThe Assign a pr
Page 61 and 62: 5. Right-click on an empty area and
Page 63 and 64: BacklightThe Backlight system setti
Page 65 and 66: External GPSExternal GPS determines
Page 67 and 68: RILThe RIL Information screen displ
Page 69 and 70: 1. Tap Remove Programs. In the list
Page 71 and 72: Task ManagerThe Task Manager provid
Page 73 and 74: 8CommunicationConnections MenuThe C
Page 75 and 76: 5. When the IrDA port finds the ali
Page 77 and 78: *Proxy Server ConnectionsIf you are
Page 79 and 80: 4. When the radio is activated (i.e
Page 81 and 82: Setting Up the Host WorkstationVeri
Page 83 and 84: • If you want the program to be p
Page 85 and 86: 9Working with GSM/HSDPA/UMTS/GPRS/E
Page 87: Installing a SIM Card1. Press the P
Page 91 and 92: Setup OptionsTap Menu > Options.The
Page 93 and 94: 4. Enter the Access point name. Tap
Page 95 and 96: Manual Network SelectionYou can sel
Page 97 and 98: 10Working with the Bluetooth RadioE
Page 99 and 100: 4. You are prompted to enter a pass
Page 101 and 102: Types of Devices and ServicesWhen y
Page 103 and 104: Transferring Files1. Tap Start > Fi
Page 105 and 106: 11Working with GPSOverviewThe Dolph
Page 107 and 108: 12Dolphin 9700 HomeBase DeviceOverv
Page 109 and 110: COMM LEDThis is the communication L
Page 111 and 112: Serial ConnectorThe following diagr
Page 113 and 114: CommunicationUSBDolphin terminals s
Page 115 and 116: RS232 Pin ConfigurationBase /Host P
Page 117 and 118: 13Dolphin 9700 Mobile Base DeviceOv
Page 119 and 120: Bottom PanelThe power supply and RS
Page 121 and 122: MountingThe adjustable mounting bra
Page 123 and 124: Establishing CommunicationThe RS232
Page 125 and 126: 14Dolphin 9700 ChargeBase DeviceOve
Page 127 and 128: Power SupplyThe base includes a pow
Page 129 and 130: MountingThis base should be mounted
Page 131 and 132: 15Dolphin 9700 QuadCharger DeviceOv
Page 133 and 134: Supplying PowerThe charger must be
Page 135 and 136: TroubleshootingIf you encounter pro
Page 137 and 138: 16Customer SupportProduct Service a
Page 139 and 140:
Limited WarrantyHoneywell Internati
Page 142:
Honeywell Scanning & Mobility9680 O
show all

Dolphin 9700 User's Guide Rev (a) - Finn-ID

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?