Dolphin 9700 User's Guide Rev (a) - Finn-ID
Dolphin 9700 User's Guide Rev (a) - Finn-ID
Dolphin 9700 User's Guide Rev (a) - Finn-ID
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Enabling the GSM RadioBy default, the GSM radio is not enabled after a hard reset. Verify the status of the radio in the <strong>Dolphin</strong>Wireless Manager.Tap Start > Settings > Connections > <strong>Dolphin</strong> Wireless Manager .If the Phone is set to OFF, tap the Phone rectangle and the GSM radio enables.Voice CommunicationYou can use the <strong>Dolphin</strong> terminal as a phone over the GSM radio.Audio ModesThe front panel of the <strong>9700</strong> contains both a speaker and a microphone that you can use to send andreceive audio signals over the GSM network, see Front Panel: <strong>9700</strong> on page 3-4.There are two audio modes:Handset Mode: The front speaker is used for receiving handset voice calls and the front panelmicrophone provides audio input to the terminal.Hands-Free Mode: Hands-free mode is when you use the rear speaker as a speakerphone. To switch tospeakerphone, tap on the speaker button in the Dialer window.9 - 4