Dolphin 9700 User's Guide Rev (a) - Finn-ID

Using the Touch PanelHoneywell defines proper use of the terminal touch panel as using a screen protector and proper stylus.Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is whytheir use is recommended for applications that require a high to medium level of interface with the touchpanel, such as signature capture for proof of delivery.Honeywell advocates the use of screen protectors on all Dolphin devices. We recommend implementinga screen protector replacement program to ensure that screen protectors are replaced periodically whensigns of damage/wear are noticeable. For general use, we recommend replacing the screen protectorevery thirty (30) days. However, replacement cycles vary according to the average level of touch paneluse in your application.Replacement screen protectors can be purchased directly from Honeywell. Please contact a Honeywellsales associate for details.Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.Honeywell warranty policy covers wear on the touch panel for the first 12 months if a screen protector isapplied and an approved stylus is used for the 12 month duration covered by the warranty.Installing a Screen ProtectorDolphin terminals ship with a screen protector already installed. You will need to replace the screenprotector at regular intervals.1. After the current screen protector has been removed from the touch panel, clean the touch panelthoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing else is still attached to thetouch panel.2. Align the exposed section of the protector with the bottom edge of the touch panel.Make sure that the screen protector is flush with each side of the touch panel.To reposition, lift up gently and reapply.3. Press the screen protector firmly and carefully across the surface of the touch panel as you peelaway the backing.4. If necessary, smooth out any air pockets or bumps.3 - 11