Technical details System pro M compact®

Systempro M compact ®Technical detailsAccessories for measurementinstrumentsMeasurementdevicesCURRENT AND VOLTAGE CONVERTERSTechnical characteristicsAmmetric convertersVoltmetric convertersin a.c./d.c.in a.c./d.c.Auxiliary supply (separated) [V] a.c. 230 a.c. 230Input rated values 1-5 A 120-300-500 VOutput rated values [V d.c.] 1-5-10 1-5-10[mA d.c.] 1-5-10-4…20 1-5-10-4…20Ohmic load [Ω] 700 700Measurement fi eld 0±In 0±UnAccuracy rating 0.5 0.5OverloadPermanent 2 In 2 UnInstantaneous 10 In/1 sec. 10 Un/1 sec.Frequency [Hz] 50/60 50/60Time delay [ms] ≤300 ≤300Alternated residue ≤1% ≤1%Self-consumption current ≤0,8 VA voltage ≤1 VAaux. supply ≤4 VAaux. supply ≤4 VAInput/output galvanic separationInput/output insulation, aux. supply 2 kV/50 Hz -1 min 2 kV/50 Hz -1 minCircuit/mass insulation 4 kV/50 Hz -1 min 4 kV/50 Hz -1 minOperating temperature [°C] 0…+55 0…+55Dimensions 3-6 DIN modules 3-6 DIN modulesWeight [kg] 0.30 0.30Current converters (a.c. input)10 V d.c.5 V d.c.1 V d.c.4÷20 mA d.c.20 mA d.c.10 mA d.c.5 mA d.c.1 mA d.c.The output selection must be performed by movingthe programming pushbuttons according to thespecific needs.SELECTABLE OUTPUTS- + - +7 8 9 10 11 12If a V output has been selected it is necessary toconnect terminals 7 and 8, while for mA outputsthe terminals 11 and 12 must be connected.1 2 3 4 5 6Supply1 AMAX11+5 AMAXCInput signal (A)The input selection is performed by connecting theterminal of the common “C” (n. 6) to the terminal4, for a 1 A input, and to the terminal 5 for a 5 Ainput.ABB11/107