Download - Fuji Xerox Printers

• Sending an E-mail With the Scanned FileNOTE:• To use the Scan to E-mail function, you first need to set up your SMTP (Simple Mail Transfer Protocol) serverinformation. SMTP is a protocol for sending e-mail. For details, refer to the Setup Guide.1 Load the document(s) face up with top edge in first into the ADF or place a single document facedown on the document glass.See also:• "Making Copies From the ADF (DocuPrint CM205 f/CM205 fw Only)" on page 194• "Making Copies From the Document Glass" on page 1922 Press the (Scan) button.3 Select Scan to E-Mail, and then press the button.4 Select E-Mail to, and then press the button.5 Select the setting listed below, and then press the button.Keypad: Enter the e-mail address directly and then press the button.Address Book: Select the e-mail address registered in the E-mail Address Book, and thenpress the button.E-Mail Group: Select the e-mail group registered in the E-mail Groups, and then press thebutton.Search Address Book: Enter a text to search from the E-mail Address Book, and then pressthe button. Select the e-mail address from the list, and then press the button.NOTE:• Users need to be registered before you can select Address Book on the operator panel.6 Select scanning options as required.7 Press the (Start) button to send e-mail.253 Scanning