Download - Fuji Xerox Printers

Resetting to Factory DefaultsAfter executing Initialize NVM and rebooting the printer, the menu parameters or data are reset totheir factory default values.NOTE:• The following procedure does not initialize the network settings.– For the DocuPrint CM205 f/CM205 fw, to initialize the wired network settings, refer to "Initialize NVM" onpage 328.– For the DocuPrint CM205 fw, to initialize the wireless network settings, refer to "Reset Wireless (DocuPrintCM205 fw Only)" on page 327.1 Press the (System) button.2 Select Admin Menu, and then press the button.3 Select Maintenance, and then press the button.4 Select Initialize NVM, and then press the button.5 Select System Section to initialize the menu parameters, and then press the button.For the DocuPrint CM205 f/CM205 fw, select User Fax Section to initialize the Address Bookdata for fax, and select User Scan Section to initialize the Address Book data for e-mail.6 Select Yes, and then press the button.The printer restarts automatically to apply the settings.Using the Operator Panel Menus and Keypad 364