Download - Fuji Xerox Printers

•ProtocolPurpose:To enable or disable each protocol. The change becomes effective after the printer is turned off andthen on.Values:NOTE:LPD Disable Disables the Line Printer Daemon (LPD) port.Enable*Enables the LPD port.Port 9100 Disable Disables the Port 9100 port.Enable*Enables the Port 9100 port.WSD Disable Disables the WSD port.Enable*Enables the WSD port.SNMP Disable Disables the Simple Network Management Protocol (SNMP)UDP port.Enable*Enables the SNMP UDP port.StatusMessenger Disable Disables the StatusMessenger feature.Enable*Enables the StatusMessenger feature.InternetServices Disable Disables an access to CentreWare Internet Servicesembedded in the printer.Enable*Enables an access to CentreWare Internet Servicesembedded in the printer.LLTD Disable Disables the LLTD.Enable*Enables the LLTD.Bonjour(mDNS) Disable Disables the Bonjour (mDNS).Enable*Enables the Bonjour (mDNS).• WSD stands for Web Services on Devices.• Initialize NVMPurpose:To initialize wired network data stored in Non-Volatile Memory (NVM). After executing this function andrebooting the printer, all wired network settings are reset to their default values.Values:YesInitializes the wired network data stored in NVM.No*Does not initialize the wired network data stored in NVM.Fax Settings (DocuPrint CM205 f/CM205 fw Only)Use the Fax Settings menu to configure the basic fax settings.NOTE:• Values marked by an asterisk (*) are the factory default menu settings.Using the Operator Panel Menus and Keypad 328