Download - Fuji Xerox Printers

Sending a Delayed FaxThe Delayed Start mode can be used to save scanned documents for transmission at a specified timeto take advantage of lower long distance rates.1 Load the document(s) face up with top edge in first into the ADF or place a single document facedown on the document glass and close the document cover.See also:• "Loading an Original Document on the ADF" on page 268• "Loading an Original Document on the Document Glass" on page 2692 Press the (Fax) button.3 Adjust the document resolution to suit your fax needs.See also:• "Resolution" on page 270• "Lighten/Darken" on page 2724 Select Delayed Start, and then press the button.5 Select On, and then press the button.6 Enter the start time using the numeric keypad or press the or button to select the start time,and then press the button.7 Select Fax to, and then press the button.8 Select Keypad, and then press the button.9 Enter the number of the remote machine using the numeric keypad, and then press thebutton.You can also use speed dial or group dial numbers.See also:• "Automatic Dialing" on page 29510 Press the (Start) button.Once the Delayed Start mode is activated, your printer stores all the documents to be faxed to itsmemory and sends them at the specified time. After faxing in the Delayed Start mode is complete, thedata in the memory is cleared.Faxing (DocuPrint CM205 f/CM205 fw Only) 278