Download - Fuji Xerox Printers

• The Output Is Too LightProblemThe output is too light.ActionThe toner cartridges may be low or need to be replaced. Confirm theamount of toner in each toner cartridge.1 Check the toner level in the Consumables tab in the PrinterStatus window of the SimpleMonitor.2 Replace the toner cartridges as necessary.Verify that the print media is dry and the correct print media is used.If not, use the print media recommended for the printer.NOTE:See also:• "Usable Print Media" on page 146Try changing the Paper Type setting in the print driver.1 On the Paper/Output tab in Printing Preferences of the printdriver, change the Paper Type setting.Disable Toner Saving Mode in the print driver.1 On the Graphics tab in Printing Preferences of the print driver,ensure that the Toner Saving Mode check box is not selected.• If the problem continues even though you have taken suggested actions described above, contact the FujiXerox local representative office or an authorised dealer.389 Troubleshooting