Download - Fuji Xerox Printers

• Sending a Fax Using a Speed Dial1 Load the document(s) face up with top edge in first into the ADF or place a single document facedown on the document glass and close the document cover.See also:• "Loading an Original Document on the ADF" on page 268• "Loading an Original Document on the Document Glass" on page 2692 To enter the speed dial number, do either of the following after pressing the (Fax) button:• Select Fax to, and then press the button. Select Speed Dial, and then press thebutton.• Press the (Speed Dial) button.3 Enter the speed dial number between 01 and 99 using the numeric keypad.The corresponding entry's name briefly appears on the LCD panel.4 Press the button.5 Adjust the document resolution to suit your fax needs.See also:• "Resolution" on page 270• "Lighten/Darken" on page 2726 Press the (Start) button.7 The document scans to the memory.When you are using the document glass, the display prompts you for another page. Select Yesto add more documents or to select No to begin sending the fax immediately, and then press thebutton.8 The fax number stored in the speed dial location is automatically dialed. The document is sentwhen the remote fax machine answers.NOTE:• Using the asterisk (*) in the first digit, you can send a document to multiple locations. For example, if you enter0*, you can send a document to the locations registered between 01 and 09.Faxing (DocuPrint CM205 f/CM205 fw Only) 298