Download - Fuji Xerox Printers

• Dynamic Methods of Setting the Printer’s IP AddressThere are two protocols available for dynamically setting the printer’s IP address:• DHCP (enabled by default)• AutoIPYou can turn on/off both protocols using the operator panel, or use CentreWare Internet Services toturn on/off DHCP.NOTE:• You can print a report that includes the printer’s IP address. On the operator panel, press the (System)button, select Report / List, press the button, select System Settings, and then press thebutton. The IP address is listed on the System Settings page.Using the Operator PanelTo turn on/off either the DHCP or AutoIP protocol:1 On the operator panel, press the (System) button.2 Select Admin Menu, and then press the button.3 Select Network, and then press the button.4 Select TCP/IP, and then press the button.5 Select IPv4, and then press the button.6 Select Get IP Address, and then press the button.7 Select DHCP/AutoIP, and then press the button.Using CentreWare Internet ServicesTo turn on/off the DHCP protocol:1 Launch your web browser.2 Enter the IP address of the printer in the address bar, and then press the Enter key.3 Select Properties.4 Select TCP/IP from the Protocol Settings folder on the left navigation panel.5 In the IP Address Mode field, select the DHCP/Autonet option.6 Click the Apply button.Printer Connection and Software Installation 78