Download - Fuji Xerox Printers

• Enabling the Panel Lock1 Press the (System) button.2 Select Admin Menu, and then press the button.3 Select Secure Settings, and then press the button.4 Select Panel Lock, and then press the button.5 Select Panel Lock Set, and then press the button.6 Select Enable, and then press the button.7 As necessary, select Change Password, and change the password using the numeric keypad.Then, press the button.NOTE:NOTE:• The factory-default panel password is 0000.• Be sure to remember the password. The procedure described below allows you to reset the password.However, for the DocuPrint CM205 f/CM205 fw, the settings for the Address Book are cleared.1 Turn off the printer. Then, while holding the (System) button, turn on the printer.• If you change the password while Panel Lock Set is Enable, perform steps 1 to 2. Enter the currentpassword, and then press the button. Perform steps 3 to 4. Select Change Password, and then pressthe button. Enter the new password, and then press the button. This will change the password.Using the Operator Panel Menus and Keypad 360