12.07.2015 Views

Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

VIVOTEKA green bar indicates that even though motions have been detected, the event has not been triggeredbecause the image variations still fall under the defined threshold.Percentage = 30%If you want to configure specific motion detection settings individually for day/night/schedule operations,please click Profile to open the Motion Detection Profile Settings page as shown below. A total of threemotion detection windows can be configured on this page as well.2011/03/21 17:08:56Please follow the steps beolw to set up a profile:1 Create a new motion detection window2 Check Enable this profile3 Select the applicable mode: Day mode, Night mode, or Schedule mode Please manually enter a timerange if you prefer the Schedule mode4 Click Save to enable the settings and click Close to exit the pageThis motion detection window will also be displayed on the Event settings page You can go to Event >Event settings > Trigger to choose it as a trigger source Please refer to page 87 for detailed information100 - <strong><strong>Use</strong>r</strong>'s <strong>Manual</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!