Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEK■ Passive modeMost firewalls do not accept new connections initiated from external requests If the FTP serversupports passive mode, select this option to enable passive mode FTP and allow data transmission topass through the firewall.To verify if the FTP settings are correctly configured, click Test The result will be shown in a pop-upwindow as shown below. If successful, you will also receive a test.txt file on the FTP server.Click Save server to enable the settings, then click Close to exit the Add server pageServer type - HTTPSelect to send the media files to an HTTP server when a trigger is activated.■ Server name: Enter a name for the server setting.■ URL: Enter the URL of the HTTP server.■ User name: Enter the user name if necessary.■ Password: Enter the password if necessary.To verify if the HTTP settings are correctly configured, click Test The result will be shown in a pop-upwindow as below. If successful, you will receive a test.txt file on the HTTP server.Click Save server to enable the settings and click Close to exit the Add server pageUser's Manual - 91