Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKAppendixURL Commands for the Network Camera1. OverviewFor some customers who already have their own web site or web control application, the NetworkCamera/Video Server can be easily integrated through URL syntax This section specifies the externalHTTP-based application programming interface The HTTP-based camera interface provides thefunctionality to request a single image, control camera functions (PTZ, output relay etc), and get and setinternal parameter values The image and CGI-requests are handled by the built-in Web server2. Style ConventionIn URL syntax and in descriptions of CGI parameters, text within angle brackets denotes content thatis to be replaced with either a value or a string When replacing the text string, the angle bracketsshould also be replaced An example of this is the description of the name for the server, denoted with in the URL syntax description below, that is replaced with the string myserver in the URLsyntax example further down in the pageURL syntax is denoted with the word "Syntax:" written in bold face followed by a box with the referencedsyntax as shown below For example, name of the server is written as and is intended tobe replaced with the name of the actual server This can either be a name, eg, "mywebcam" or "thecamadomainnet" or the associated IP number for the server, eg, 1921680220Syntax:http:///cgi-bin/viewer/videojpgDescription of returned data is written with "Return:" in bold face followed by the returned data in a box All data isreturned in HTTP format, ie, each line is separated with a Carriage Return and Line Feed (CRLF) printed as \r\nReturn:HTTP/10 \r\nURL syntax examples are written with "Example:" in bold face followed by a short description and a light grey boxwith the exampleExample: request a single snapshot imagehttp://mywebserver/cgi-bin/viewer/videojpgUser's Manual - 111