Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKDay/Night SettingsSwitch to B/W in night modeSelect this checkbox to enable the Network Camera to automatically switch to Black & White displayduring the night modeDisable IR LED (This option is not present on all models configuration screen!)If you do not want to use the IR illuminators, you can select this option to turn it offIR cut filterWith a removable IR-cut filter, this Network Camera can automatically remove the filter to let Infrared lightpass into the sensor during low light conditions■ Auto modeThe Network Camera automatically removes the filter by judging the level of ambient light.■ Day modeIn day mode, the Network Camera switches on the IR cut filter at all times to block infrared light fromreaching the sensor so that the colors will not be distorted■ Night modeIn night mode, the Network Camera switches off the IR cut filter at all times for the sensor to acceptinfrared light, thus helping to improve low light sensitivity■ Synchronize with digital inputThe Network Camera automatically removes the IR cut filter when DI triggers.■ Schedule modeThe Network Camera switches between day mode and night mode based on a specified schedule.Enter the start and end time for day mode Note that the time format is [hh:mm] and is expressed in24-hour clock time By default, the start and end time of day mode are set to 07:00 and 18:00Light sensor sensitivitySelect Low, Normal, or High sensitivity for the light sensor70 - User's Manual