Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKAdd mediaClick Add media to open the media setting window You can specify the type of media that will besent when a trigger is activated. A total of 5 media settings can be configured. There are three choicesof media types available: Snapshot, Video Clip, and System log Select the item to display the detailedconfiguration options. You can configure either one or all of them.Media type - SnapshotSelect to send snapshots when a trigger is activated■ Media name: Enter a name for the media setting.■ Source: Select to take snapshots from streams 1 ~ 4.■ Send pre-event imagesThe Network Camera has a buffer area; it temporarily holds data up to a certain limit Enter a numberto decide how many images to capture before a trigger is activated Up to 7 images can be generated■ Send post-event imagesEnter a number to decide how many images to capture after a trigger is activated Up to 7 images canbe generatedFor example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15images are generated after a trigger is activated1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.Trigger Activation■ File name prefixEnter the text that will be appended to the front of the file name.User's Manual - 93