Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

More documents

Recommendations

Info

VIVOTEKEvent > Event settings Advanced ModeThis section explains how to configure the Network Camera to respond to particular situations(event) A typical application is that when a motion is detected, the Network Camera sendsbuffered images to an FTP server or e-mail address as notifications Click on Help, there isan illustration shown in the pop-up window explaining that an event can be triggered by manysources, such as motion detection or external digital input devices When an event is triggered,you can specify what type of action that will be performedEventAn event is an action initiated by a user-defined trigger source. In the Event column, click Add to openthe event settings window86 - User's Manual
VIVOTEK■ Event name: Enter a name for the event setting■ Enable this event: Select this option to enable the event setting■ Priority: Select the relative importance of this event (High, Normal, or Low) Events with a higherpriority setting will be executed first.■ Detect next event aftermotion is detectedseconds: Enter the duration in seconds to pause motion detection after aFollow the steps 1~3 to arrange the three elements -- Schedule, Trigger, and Action to set an event Atotal of 3 event settings can be configured.1 ScheduleSpecify the period for the event Please select the days of the week and the time in a day (in 24-hr timeformat) to specify when will the event-triggering conditions take effect2 TriggerThis is the cause or stimulus which defines what will trigger the event. The trigger source can be configuredto use the Network Camera’s built-in motion detection mechanism or external digital inputsThere are several choices of trigger sources as shown on next page Select each item to display itsrelated options■ Video motion detectionThis option makes use of the built-in motion detection mechanism as a trigger source To enable thisfunction, you need to configure a Motion Detection Window first. For more information, please refer toMotion Detection on page 99 for details■ PeriodicallyThis option allows the Network Camera to trigger periodically for every other defined minute. Up to 999minutes are allowed■ Digital inputThis option allows the Network Camera to use an external digital input device or sensor as a triggersource Depending on your application, there are many choices with digital input devices on the marketwhich help detect changes in temperature, vibration, sound, light, etc■ PIRThis option allows the Network Camera to trigger an event when the built-in PIR (Passive Infrared)sensor detects any motion objects by their thermal to prevent the occurrences of false alarms■ System bootThis option triggers the Network Camera when the power to the Network Camera is disconnected■ Recording notifyUser's Manual - 87
Page 1 and 2:
FD81622MP • Full HD • PIR • F
Page 3:
VIVOTEKTechnical Specifications 17
Page 6 and 7:
VIVOTEKPhysical DescriptionCamera F
Page 8 and 9:
VIVOTEKDI/DO DiagramPlease refer to
Page 10 and 11:
POWER CO LISION1 2 3 4 5LINKRECEIVE
Page 12 and 13:
LINKRECEIVEPARTITIONVIVOTEKGeneral
Page 14 and 15:
VIVOTEKBased on the live image retr
Page 16 and 17:
VIVOTEKAccessing the Network Camera
Page 18 and 19:
VIVOTEK3 Refresh your web browser,
Page 20 and 21:
VIVOTEKUsing VIVOTEK Recording Soft
Page 22 and 23:
VIVOTEKFocus Assist Button:Follow t
Page 24 and 25:
VIVOTEKH264 / MPEG-4 Protocol and M
Page 26 and 27:
VIVOTEKClient SettingsThis chapter
Page 28 and 29:
VIVOTEKConfigurationClick Configura
Page 31 and 32:
VIVOTEKSystem > Homepage layout Adv
Page 33 and 34:
VIVOTEK■ Follow the steps below t
Page 35 and 36: VIVOTEKAccess logAccess log display
Page 37 and 38: VIVOTEKGeneral settings > RestoreTh
Page 39 and 40: VIVOTEKThe following message is dis
Page 41 and 42: VIVOTEKSecurity > HTTPS (Hypertext
Page 43 and 44: VIVOTEK3 The following information
Page 45: VIVOTEKTips:► 1. How do I cancel
Page 48 and 49: VIVOTEKNetwork: This rule allows th
Page 50 and 51: VIVOTEK3 When all settings are comp
Page 52 and 53: VIVOTEKPrimary DNS: The primary dom
Page 54 and 55: VIVOTEK4 In the Networking Services
Page 56 and 57: VIVOTEKPlease follow the steps belo
Page 58 and 59: VIVOTEKAudio is being transmitted t
Page 61 and 62: VIVOTEKAuthentication: Depending on
Page 63 and 64: VIVOTEKNetwork > QoS (Quality of Se
Page 65 and 66: VIVOTEKNetwork > DDNSThis section e
Page 67 and 68: VIVOTEK4 Select Enable DDNS and cli
Page 69 and 70: VIVOTEKMedia > ImageAdvanced ModeTh
Page 71 and 72: VIVOTEKPreferenceOn this page, you
Page 73 and 74: VIVOTEKIf you want to configure ano
Page 75 and 76: VIVOTEKThe inclusive window refers
Page 77 and 78: Privacy mask Advanced ModeClick Pri
Page 79 and 80: VIVOTEKNOTE:► All the items in th
Page 81 and 82: VIVOTEK■ Intra frame periodDeterm
Page 83 and 84: VIVOTEKPTZ > PTZ settings Advanced
Page 85: VIVOTEKPatrol settingsYou can selec
Page 89 and 90: VIVOTEKTo configure an event with v
Page 91 and 92: VIVOTEK■ Passive modeMost firewal
Page 93 and 94: VIVOTEKAdd mediaClick Add media to
Page 95 and 96: VIVOTEK■ Maximum durationSpecify
Page 97 and 98: VIVOTEKHere is an example of the Ev
Page 99 and 100: VIVOTEKApplications > Motion detect
Page 101 and 102: VIVOTEKNOTE:► How does motion det
Page 103 and 104: VIVOTEKRecording > Recording settin
Page 105 and 106: VIVOTEK2 DestinationYou can select
Page 107 and 108: VIVOTEKcard The new recording name
Page 109 and 110: VIVOTEKLocal storage > Content mana
Page 111 and 112: VIVOTEKAppendixURL Commands for the
Page 113 and 114: VIVOTEKhttp://mywebserver/cgi-bin/d
Page 115 and 116: VIVOTEKhttp:///cgi-bin/admin/setpar
Page 117 and 118: VIVOTEK7.1 systemGroup: systemNAME
Page 119 and 120: VIVOTEKYakutsk380: GMT 09:30 Adelai
Page 121 and 122: VIVOTEK7.2 statusGroup: statusNAME
Page 123 and 124: VIVOTEKtypelan,pppoeChange HTTP por
Page 125 and 126: VIVOTEK7.6.3 IPV6Subgroup of networ
Page 127 and 128: VIVOTEKs3_accessname 1/6 RTSP acce
Page 129 and 130: VIVOTEKaddress>ipv6list_i String[44
Page 131 and 132: VIVOTEK0->2x,1->4x,2->8x(not used i
Page 133 and 134: VIVOTEK_quant 99, 100 “ratecontro
Page 135 and 136: VIVOTEKbgain 0~100 4/4 Manual set b
Page 137 and 138:
VIVOTEK7.11 Image setting per chann
Page 139 and 140:
VIVOTEK7.13 Exposure window setting
Page 141 and 142:
VIVOTEK7.15 Time Shift settingsGrou
Page 143 and 144:
VIVOTEKLuna_VC,Mars_VC,Planex_VC,Su
Page 145 and 146:
VIVOTEKlevel 0~7 6/6 Levels used to
Page 147 and 148:
VIVOTEKwin_i_left 0 ~ 320/352 4/4 L
Page 149 and 150:
VIVOTEKstorage_dbenabled 0/7 Media
Page 151 and 152:
VIVOTEKuart_httptunnel 0/7 Indicat
Page 153 and 154:
VIVOTEKdi 6/6 Indicate the source
Page 155 and 156:
VIVOTEK7.31 Server setting for even
Page 157 and 158:
VIVOTEK7.33 RecordingGroup: recordi
Page 159 and 160:
VIVOTEK7.34 HTTPSGroup: https (capa
Page 161 and 162:
VIVOTEKPARAMETER VALUE SECURITYDESC
Page 163 and 164:
VIVOTEKExample: Query the status of
Page 165 and 166:
VIVOTEKquality 1~5 The quality of t
Page 167 and 168:
VIVOTEK8.10 ePTZ Camera Control (ca
Page 169 and 170:
VIVOTEK8.12 ePTZ Recall (capability
Page 171 and 172:
VIVOTEK8.17 Event/Control HTTP Tunn
Page 173 and 174:
VIVOTEKunique integer.triggerType
Page 175 and 176:
VIVOTEKhttp:///cgi-bin/admin/lsctrl
Page 177 and 178:
VIVOTEKReturn CodeDescription400 Ba
Page 179 and 180:
VIVOTEKTechnical SpecificationsTech
Page 181:
VIVOTEKElectromagnetic Compatibilit
show all

Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?