Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEK0: off1: auto2: always on3: keep current valuewdrc_strength 0~2 4/4 WDR enhanced.0: low1: medium2: highagc 0,1,2 4/4 Set auto gain control to normal level or MAX level.0->2x,1->4x,2->8x(not used in FD8162)agcmode auto,fixed 4/4 Set auto gain control mode.maxgain 0~100 4/4 Manual set maximum gain value.mingain 0~100 4/4 Manual set minimum gain value.autoiris 4/4 Enable auto Iris.(not used in FD8162)7.10 IR cut controlGroup: ircutcontrol (capability.nvideoinprofile > 0)NAME VALUE SECURITYDESCRIPTIONmodeauto,day,night,di,schedule(get/set)6/6 Set IR cut control modedaymodebegintime 00:00~23:59 6/6 Day mode begin timedaymodeendtime 00:00~23:59 6/6 Day mod end timebwmode 6/6 Switch to B/W in night mode if enabledsensitivitylow,normal,high6/6 Sensitivity of light sensor136 - User's Manual