Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKApplications > Motion detectionThis section explains how to configure the Network Camera to enable motion detection. A totalof three motion detection windows can be configured.2011/03/10 17:08:56Motion Detection Setting 1:For normal situationsFollow the steps below to enable motion detection:Follow the steps below to enable motion detection:1 Click New to add a new motion detection window2 In the Window Name text box, enter a name for the motion detection window■ To move and resize the window, drag and drop your mouse on the window.■ To delete a window, click X on the upper right corner of the window.Motion Detection Setting 2:For special situations3 Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving theSensitivity and Percentage slide bar4 Click Save to enable the settings5 Select Enable motion detection to enable this functionFor example:2011/03/10 17:08:56The Percentage Indicator will rise or fall depending on the variation between sequential images Whenmotions are detected by the Network Camera and are considered to have exceeded the definedthreshold, the red bar rises Meanwhile, the motion detection window will be outlined in red Photos orvideos can be captured instantly and configured to be sent to a remote server (Email, FTP) using thisfeature as a trigger source For information on event settings, please refer to Event settings on page 86User's Manual - 99