Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKReturn CodeDescription400 Bad Request Request is rejected because some parameter values are illegal.415 Unsupported Media Type Returned, if forcechk appears, when minsft is not achievable or thetimeshift feature of the target stream is not enabled.8. 24 Open Anystream (capability.nanystream > 0)Note: This request requires Viewer access privileges.Syntax:For HTTP push server (MJPEG):http:///videoany.mjpg?codectype=mjpeg[&resolution=&mjpeg_quant=&mjpeg_qvalue=&mjpeg_maxframe=]For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.rtsp:///liveany.sdp?codectype=mpeg4[&resolution=&mpeg4_intraperiod=&mpeg4_ratecontrolmode=&mpeg4_quant=&mpeg4_qvalue=&mpeg4_bitrate=&mpeg4_maxframe=]For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.rtsp:///liveany.sdp?codectype=h264[&resolution=&h264_intraperiod=&h264_ratecontrolmode=& h264_quant=& h264_qvalue=& h264_bitrate=&h264_maxframe=]PARAMETER VALUE DESCRIPTIONcodectypemjpeg, mpeg4, h264Set codec type for Anystream.solutioncapability_videoin_resolution Video resolution in pixels.mjpeg_quant 0, 1~599, 1~5Quality of JPEG video.0,99 is the customized manual input setting.1 = worst quality, 5 = best quality.mjpeg_qvalue 10~2002~97mjpeg_maxframe 1~25,Manual video quality level input.(This must be present if mjpeg_quant is equal to 0, 99)Set maximum frame rate in fps (for JPEG).26~30 (only for NTSC or60Hz CMOS)User's Manual - 177