Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKPTZ > PTZ settings Advanced ModeThis section explains how to control the Network Camera’s Pan/Tilt/Zoom operationDigital: Control the e-PTZ operation It allows users to quickly move the focus to a preconfiguredtarget area for close-up viewing without physically zooming the camera.Digital PTZ Operation (E-PTZ Operation)If you select “Digital“, the e-PTZ control settings section will be displayed as shown below:2010/12/10 17:08:56Select stream: Select one of the stream 1~3 to set up the e-PTZ control Please note that each streamcan be set up with its own preset and patrol settings Refer to the following page for details about how toset up preset and patrol settingsAuto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed controlWhen completed with the settings of e-PTZ, click Save to enable the settings on this pageUser's Manual - 83