Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKTo configure an event with video recording or snapshots, it is necessary to configure/provide servers andstorage media settings so that the Network Camera will know where to send the media files to when atrigger is activatedAdd serverClick Add server to unfold the server setting window. You can specify where the notification messagesare sent when a trigger is activated. A total of 5 server settings can be configured.There are four choices of server types available: Email, FTP, HTTP, and Network storage Select the itemto display the detailed configuration options. You can configure either one or all of them.Server type - EmailSelect to send the media files via email when a trigger is activated.■ Server name: Enter a name for the server setting.■ Sender email address: Enter a valid email address as the sender address.■ Recipient email address: Enter a valid email address as the recipient address.■ Server address: Enter the domain name or IP address of the email server.■ User name: Enter the user name of the email account if necessary.■ Password: Enter the password of the email account if necessary.■ Server port: The default mail server port is set to 25. You can also manually set another port.If your SMTP server requires a secure connection (SSL), check This server requires a secureconnection (SSL).User's Manual - 89