Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKdi 6/6 Indicate the source id of di trigger.This field is required when trigger condition is “di”.One bit represents one digital input. The LSBindicates DI 0.mdwin 6/6 Indicate the source window id of motion detection.This field is required when trigger condition is “md”.One bit represents one window.The LSB indicates the 1 st window.For example, to detect the 1 st and 3 rd windows, setmdwin as 5.mdwin0 6/6 Similar to mdwin. The parameter takes effect whenprofile 1 of motion detection is enabled.vi 6/6 Indicate the source id of vi trigger.This field is required when trigger condition is “vi”.One bit represents one digital input. The LSBindicates VI 0.inter 1~999 6/6 Interval of snapshots in minutes.This field is used when trigger condition is “seq”.weekday 0~127 6/6 Indicate which weekday is scheduled.One bit represents one weekday.bit0 (LSB) = Saturdaybit1 = Fridaybit2 = Thursdaybit3 = Wednesdaybit4 = Tuesdaybit5 = Mondaybit6 = SundayFor example, to detect events on Friday andSunday, set weekday as 66.begintime hh:mm 6/6 Begin time of the weekly schedule.endtime hh:mm 6/6 End time of the weekly schedule.(00:00 ~ 24:00 sets schedule as always on)lowlightcondition0, 1 6/6 Switch on white light LED in low light condition0 => Do action at all times1 => Do action in low-light conditionsaction_do_i_enableaction_do_i_durationUser's Manual - 153