Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

LINKRECEIVEPARTITIONVIVOTEKGeneral Connection (without PoE)1 If you have external DI devices, make the connection from general I/O terminal block2 Ethernet, power, and other cables are user-supplied Use a Category 5 Cross Cable whenNetwork Camera is directly connected to PC3 Connect either the DC or AC pins from the terminal block to a power outletEthernetSwitchPOWER COLLISION1 2 3 4 5Pin3 & 4 AC 24VSoftware InstallationBlack Pin1 & 2 DC 12VInstallation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set upyour Network Camera on the LAN1 Install IW2 under the Software Utility directory from the software CDDouble click the IW2 shortcut on your desktop to launch the programInstallationWizard 22 The program will conduct an analysis of your network environmentAfter your network environment is analyzed, please click Next to continue the programRedIW23 The program will search for all VIVOTEK network devices on the same LAN4 After a brief search, the main installer window will pop up Double-click on the MAC addressthat matches the one printed on the camera label or the S/N number on the package box label12 - User's Manual