Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEK7.34 HTTPSGroup: https (capability.protocol.https > 0)NAME VALUE SECURITYDESCRIPTION(get/set)enable 6/6 To enable or disable secure HTTP.policy 6/6 If the value is 1, it will force HTTP connectionredirect to HTTPS connectionmethodauto,manual,install6/6 auto => Create self-signed certificateautomatically.manual => Create self-signed certificatemanually.install => Create certificate request and install.status -3 ~ 1 6/7 Specify the https status.-3 = Certificate not installed-2 = Invalid public key-1 = Waiting for certificate0 = Not installed1 = Activecountryname string[2] 6/6 Country name in the certificate information.stateorprovincename string[128] 6/6 State or province name in the certificateinformation.localityname string[128] 6/6 The locality name in the certificate information.organizationname string[64] 6/6 Organization name in the certificate information.unit string[32] 6/6 Organizational unit name in the certificateinformation.commonname string[64] 6/6 Common name in the certificate information.validdays 0 ~ 3650 6/6 Valid period for the certification.7.35 Storage management settingCurrently it’s for local storage (SD, CF card)Group: disk_i n is the total number of storage devices. (capability.storage.dbenabled > 0)PARAMETER VALUE SECURITYDESCRIPTION(get/set)cyclic_enabled 6/6 Enable cyclic storage method.User's Manual - 159