Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKPreferenceOn this page, you can tune the White balance, Image adjustment and WDR enhanced parameters Youcan configure two sets of preferred settings: one for normal situations, the other for special situations,such as day/night/schedule mode2011/03/13 17:08:56Sensor Setting 1:For normal situationsSensor Setting 2:For special situationsWhite balance: Adjust the value for the best color temperature■ Auto: It will automatically adjust the color temperature of the light in response to different light sources.You may follow the steps below to adjust the white balance to the best color temperature1 Set the White balance to Auto2 Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the colortemperature automatically3 Check Fix current value to confirm the setting while the white balance is being measured.■ Manual: This item allows users to manually input the R gain & B gain ratios.Image Adjustment■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. You can also selectCustomize and manually enter a value■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this function willbe disabled if you enable WRD enhancement in the column belowUser's Manual - 71