Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEK8.10 ePTZ Camera Control (capability.eptz > 0)Note: This request requires camctrl privileges.Method: GET/POSTSyntax:http:///cgi-bin/camctrl/eCamCtrl.cgi?channel=&stream=[&move=] – Move home, up, down, left, right[&auto=] – Auto pan, patrol[&zoom=] – Zoom in, out[&zooming=&zs=] – Zoom without stopping, used for joystick[&vx=&vy=&vs=] – Shift without stopping, used for joystick[&x=&y=&videosize=&resolution=&stretch=] – Click on image(Move the center of image to the coordination (x,y) based on resolution or videosize.)[ [&speedpan=][&speedtilt=][&speedzoom=][&speedapp=] ] – Set speeds[&return=]Example:http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=0&move=righthttp://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&vx=2&vy=2&vz=2http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&x=100&y=100&videosize=640x480&resolution=640x480&stretch=0PARAMETER VALUE DESCRIPTIONchannel Channel of video source.stream Stream.move home Move to home ROI.updownleftrightMove up.Move down.Move left.Move right.auto pan Auto pan.patrolstopAuto patrol.Stop auto pan/patrol.zoom wide Zoom larger view with current speed.teleZoom further with current speed.User's Manual - 167