Vivotek FD8162 Fixed Dome Network Camera User Manual - Use-IP

VIVOTEKThis option allows the Network Camera to trigger when the recording disk is full or when recordingstarts to overwrite older data■ Camera tampering detectionThis option allows the Network Camera to trigger when the camera detects that is is being tamperedwith To enable this function, you need to configure the Tampering Detection option first. Please referto page 102 for detailed information■ Manual TriggerThis option allows user to enable event triggers manually by clicking the on/off button on thehomepage. Please configure 1 ~ 3 events before using this function.3 ActionDefine the actions to be performed by the Network Camera when a triggeris activated■ Trigger digital output for secondsSelect this option to turn on the external digital output device when a trigger is activated Specify thelength of the trigger interval in the text box■ Backup media if the network is disconnectedSelect this option to backup media file on SD card if the network is disconnected. Please note that thisfunction will only apply after you set up the network storage (NAS) For more information about how toset up network storage, please refer to page 10588 - User's Manual