Download Glorystar Installation Guide - Free Christian Satellite ...

38Universal Post Mount AssemblyMount the Universal Post Mount Foot Plate toa wall stud or roof rafter using two 5/16th x 3”lag bolts. Additional 5/16th x 2” lag bolts on theouter edges will increase stability. To preventwater leakage, use the included silicone sealantor other waterproofing product on all wall or roofpenetrations.The Universal Post Mount can be assembledfor flat and pitched roof or wall typeinstallations. The post has two slots forattaching to the Foot Plate on both ends of thetube. This allows the dish to be mounted inone of two methods. Either with the “J” at thebottom of the post providing a higher reach(as pictured), or the “J” is positioned at thetop of the post for greater outward reach.Level and Secure PostInsert the Bubble Spirit Level into the topof the post. Be sure that the level is seatedlevel and flush with the top edge of thepost.The unique slots in the post tubeallows the post to be leveled or madeplumb in almost any installationposition.If the post is not exactly plumb, theelevation scale will not be accurateand it will be very difficult to locatethe satellite and properly tune thedish for reliable reception.B. Gohl © GEOSATpro