Download Glorystar Installation Guide - Free Christian Satellite ...

More documents

Recommendations

Info

46The Glorystar receiver will automatically tune to Channel 901, RTNews Channel. A Signal Strength and Signal Quality meter is nowdisplayed on the connected television screen with a loud beepingsound emitted from the TV speakers. The beeping pitch will changewhen the correct satellite signal is detected. Now it is time to findthe satellite.The Signal Level (S) is important when determining if thereceiver is connected to a working LNBF. A Signal Levelreading of 50% or higher indicates a connection to a workingLNBF, but not indicate finding the correct satellite.This screen shot shows a receiverthat is not properly connected tothe dish. A Signal Level (S) of0-10% indicates that there is nota good connection between thereceiver and the LNBF. Verify thata coax cable is directly attachedfrom the SAT IN port on the rear ofthe satellite receiver to the LNBFon the satellite dish.Do not attempt to use pre wire or previously used coax cablesor switches. Do not use splitters for multiple receivers.Splitters DO NOT work!A Signal Level (S) reading of 50%or better indicates that the receiveris connected to a working LNBF.The low Signal Quality (Q)reading at or below 30% indicatesthat the dish is not properly aimedor the LNBF is not properly rotatedto receive the satellite signal.B. Gohl © GEOSATpro
Locate and Peak Satellite SignalThe Orange Signal Button on the top of the remote toggles the SignalMeter ON/OFF. The Blue Button on the remote toggles the meterbeeping sound ON/OFF.Aim the dish towards the distant landmark which corresponds withthe compass reading for the satellite. Observe the Signal Quality (Q)reading on Channel 901, RT News Channel and very slowly panthe dish.If the dish is panned beyond 15 degrees from the satellite compassreading and no Signal Quality (Q) is detected or televisionprogramming displayed, return the dish to the starting position thenslowly sweep 15 degrees in the opposite direction.When the correct satellite is foundthe beeping sound changes to ahigher tone and the Signal Quality(Q) bar turns Green. The meter willdisplay an increased Signal Quality(Q) reading. RT News Channelprogramming will be visible.If no Green Signal Quality (Q) reading is detected, increase ordecrease the elevation by one degree increments and repeat theslow sweep. The elevation may need to be adjusted +/- 5 degreesdepending on the post being plumb. Move the dish very slowly toallow the receiver to process the signal information. A movement ofjust 1/16th of a inch can result in a perfect or no signal. This processmay need to be repeated many times to aim and peak the quality ofthe signal.When the dish is correctly aimed,the RT News Channel televisionprogramming will be displayed andthe Signal Quality (Q) reading willread 50% or higher. A stable level onthe 6 second bar graph indicates goodLNBF and dish alignment.www.geosatpro.com Toll Free 888-483-467347
Page 2 and 3: Owners ManualInstallation GuideVers
Page 5 and 6: Important Safeguardswww.geosatpro.c
Page 7 and 8: DSR200c / DVR1100c SpecificationsMP
Page 9 and 10: Rear Panel12345678910111213Connects
Page 11 and 12: Remote Key Functions DSR200c / DVR1
Page 13 and 14: Receiver Operation Guide11Program I
Page 15 and 16: Stereo or Mono Audio Selectiona) Pr
Page 17 and 18: Receiver Menu ItemsPress MENU butto
Page 19 and 20: www.geosatpro.com Toll Free 888-483
Page 21 and 22: 1. Press RED button to exit - no mo
Page 23 and 24: 21Highlight Control Panel. Press OK
Page 25 and 26: Highlight USB. Press OK.This menu s
Page 27 and 28: 25V-1. Time Machine - DVR1100cTime
Page 29 and 30: 27Timer - DVR1100cIf no event infor
Page 31 and 32: Installation Guides29This guide is
Page 33 and 34: Site Survey31If you feel comfortabl
Page 35 and 36: 33How High Up in the Sky is the Sat
Page 37 and 38: Dish Assembly35Once a dish location
Page 39 and 40: 37Attach the LNBF Arm to the Elevat
Page 41 and 42: Center the bubble in the level then
Page 43 and 44: When setting the elevationangle on
Page 45: Connect Receiver to a TVThe easiest
Page 50 and 51: 48Press the CH/DOWN arrowbutton on
Page 52 and 53: 50Two Room Install - (optional)Do n
Page 54 and 55: 527. Press the RIGHT arrow to selec
Page 56 and 57: 54Using Satellite MetersInexpensive
Page 58 and 59: 56FAQ - Frequently Asked QuestionsH
Page 60 and 61: 58FAQ - DVR1100c - cont.USB drive m

Download Glorystar Installation Guide - Free Christian Satellite ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?