Download Glorystar Installation Guide - Free Christian Satellite ...

527. Press the RIGHT arrow to selectInstallation Menu. Press the Down arrowto select Channel Search. Press OK toaccept and go to next screen.The receiver must be configured for the satellite that you wish toreceive and the satellite equipment that is connected.Before programming the receiver you will need to know whatsatellite carries the channels that you wish to receive. If you do notknow the name of the satellite, visit www.satelliteguys.us/thelist/for a list of satellites and channels. The majority of free channelsin North America are found on satellite Galaxy 19 97W (G19-KU).For this installation example, we will use satellite G19 and select anactive transponder on that satellite of 12152MHz.8.Enter Password (default 0, 0, 0, 0)9. Satellite - Press OK to display list ofsatellites. Select the proper satellite (G19-KU). Press OK.10. TP Frequency - Press OK to listpreprogrammed transponders. Select anactive frequency (12152). Press OK.Determine the type of LNBF that will be connected. The LNB type orLO frequency is normally printed on the LNBF label or packaging.A Standard type LNBF LO frequency is 10750 and an Universal 1type LNBF LO frequency is 9750/10600). For this example we willuse Standard type LO 10750.11. LNB - Press OK list LNB LO type or frequency. Select LOtype or frequency (10750). Press OKB. Gohl © GEOSATpro