Vertex VXA 710 Transceiver - Pilot Supplies

Installation ofFBA-23 Alkaline Battery Case (Option)The optional FBA-23 Battery Case allows receive monitoringusing two “AA” size Alkaline batteries.To Install Alkaline Batteries into the FBA-23 Slide the batteries into the FBA-23as shown in the illustration, with theNegative [–] side of the batteriestouching the spring connections insidethe FBA-23. Open the Battery Pack Latch on thebottom of the radio.. Install the FBA-23 into the battery compartment onthe back of the transceiver, then close the Battery PackLatch on the bottom of the radio.BEFORE YOU BEGINThe FBA-23 does not provide connections for charging,since Alkaline cells cannot be re-charged. Therefore, theNC-72B/C, E-DC-5B, or E-DC-6 may safely be connectedto the EXT DC jack when the FBA-23 is installed.Notes: The FBA-23 is designed for use only with AA-typeAlkaline cells. If you do not use the VXA-710 for a long time, removethe Alkaline batteries from the FBA-23, as batteryleakage could cause damage to the FBA-23 and/or the transceiver.10VXA-710 SPIRIT OPERATING MANUAL